
ROLTEK 20V Brushless Cordless Drill Driver
A professional-grade brushless drilling platform built for continuous jobsite duty.
Product Catalogue
Machines, hand tools, outdoor equipment, measuring instruments, consumables, decorating tools, fixings and safety equipment — from one manufacturer and export partner.

A professional-grade brushless drilling platform built for continuous jobsite duty.

Three-mode drilling, driving and percussion in one cordless body.

Lightweight sub-compact driving power for confined installation work.

Corded reliability with percussion drilling for continuous production use.

High-torque fastening power in a compact, balanced professional housing.

Heavy bolting torque for steel assembly and automotive service fleets.

Slim right-angle head for drilling where a standard drill will not fit.

Three-mode hammering power engineered for concrete and masonry work.

Heavy SDS-max class hammering for structural concrete work.

Cordless anchor drilling with corded-class impact energy.

Sustained chiselling output for demolition and breaking crews.

Ground-breaking energy for concrete slabs and asphalt.

Cordless straight-line cutting with full depth capacity in one pass.

Corded cutting power for sustained timber and formwork production.

Aggressive stroke rate for fast cuts in wood, metal and pipe.

Corded sabre saw built for long demolition shifts.

Precise curved cutting with cordless freedom on site.

Corded jigsaw precision for repeatable shop production.

High-capacity abrasive cutting for structural steel sections.

Consistent cutting and grinding performance under sustained industrial load.

Full-size grinding capacity for heavy fabrication environments.

Cordless grinding and cutting where power access is limited.

Controlled variable speed polishing for high-gloss finishing work.

Swirl-free finishing with integrated dust management.

Cordless surface preparation without trailing cables.

Cutting, sanding and scraping from one cordless platform.

Fast single-hand measurement with area and volume calculation.

Long-range measurement for large industrial and commercial sites.

Self-levelling green beam layout across the full room plane.

Outdoor grade levelling with detector for large-site work.

Battery cutting power for outdoor professionals working off-grid.

Clean, low-vibration hedge cutting through a full working day.

High-volume air flow for fast site and grounds clearing.

Balanced brushless trimming for daily grounds maintenance.

One platform, full compatibility across the ROLTEK cordless range.

Extended runtime for grinders, saws and rotary hammers.

Two-bay rapid charging to keep crews working continuously.

Complete drilling and driving consumables in one site case.

Circular, reciprocating and jigsaw blades matched to ROLTEK machines.

Drop-forged CR-V pliers with induction-hardened cutting edges.

Flush-cut jaws for clean wire and cable trimming.

Slim tapered nose for confined-space gripping and forming.

Multi-position slip joint for pipes, nuts and fittings.

Adjustable clamping force with quick-release lever.

High-leverage compound cutting for bolts, rod and chain.

Left, right and straight cut snips for sheet metal work.

Wide-opening jaw with precision worm gear for heavy service work.

Mirror-polished CR-V spanners with 12-point ring ends.

Forged double-ended spanners in matched metric pairs.

72-tooth reversible ratchet with a full metric socket range.

Ball-end hex and Torx keys in a folding or clip holder.

Ductile iron body with hardened self-cleaning teeth.

Magnetic S2 tips with ergonomic anti-roll handles for daily use.

Swivel-cap precision drivers for electronics and small assemblies.

Three-position ratchet handle with in-handle bit storage.

Forged head with hickory or fibreglass handle for framing work.

Heavy forged heads for chisel work, breaking and stake driving.

Non-marking rubber head for tiling, flooring and assembly.

Heat-treated cutting edge with shock-absorbing handle.

High-tension steel frame with soft-grip handle and spare blade.

Induction-hardened teeth for fast, clean cuts in timber.

Flat, half-round, round and triangular files in a roll pouch.

Malleable iron frame with hardened swivel pressure pad.

One-handed trigger clamping with reversible spreader jaws.

Cast iron vice with anvil, swivel base and replaceable jaws.

Die-cast body with quick blade change and in-handle storage.

Auto-lock slider with SK5 snap-off blade segments.

Complete blow-moulded home and maintenance kit for retail packs.

Heavy-duty tool bag pre-loaded with core trade hand tools.

Nylon-coated blade with strong standout and impact-resistant case.

Open-reel fibreglass tape for site setting-out and land measurement.

Milled aluminium body with shock-resistant acrylic vials.

Compact magnetic level for pipework and tight installations.

Fast-rewind die-cast reel with high-visibility marking chalk.

Self-levelling horizontal and vertical lines for interior fit-out.

Stainless caliper for internal, external, step and depth measurement.

Ground HSS bits in an indexed case for metal, wood and plastic.

Carbide-tipped SDS bits with fast dust removal flutes.

Tungsten carbide tips for brick, block and concrete.

Bi-metal cups with arbor and pilot bit for clean pass-through holes.

Tungsten carbide tipped teeth with anti-friction blade coating.

HCS and bi-metal blades for wood, metal and demolition cutting.

Reinforced abrasive discs for metal, stainless and stone.

Zirconia alumina flaps for aggressive stock removal and blending.

Segmented and turbo rims for tile, concrete and masonry cutting.

Crimped and twist-knot brushes for rust, weld and paint removal.

Wool bonnets, foam pads and rubber backing plates for finishing.

Aluminium oxide abrasives for orbital, sheet and hand sanding.

Impact-rated S2 bits and sockets in an organised site case.

High pick-up microfibre sleeve with a balanced ergonomic frame.

Small-format rollers for doors, frames and cut-in areas.

Embossed sleeves for decorative wall texture finishes.

Synthetic filament brushes for water and solvent based coatings.

Wide bristle block for fast coverage on walls and fences.

Flexible stainless blades with riveted wooden handles.

Square and V-notch trowels for tile adhesive application.

Flat finishing trowel for render, plaster and skim coats.

Hardened blades for stripping, filling and surface preparation.

Complete decorating kit for contractors and retail bundles.

Hardened screws with sharp points for fast, consistent driving.

Bugle head phosphate screws for plasterboard systems.

Drill-point screws for steel framing and metal sheeting.

Grade 4.8 and 8.8 metric bolts in bulk and trade packs.

Round wire, clout, masonry and panel pins in bulk or blister.

Nylon and metal fixings for masonry, concrete and hollow walls.

Self-drive, spring toggle and metal cavity fixings for hollow walls.

Hex nuts, nylocs, flat and spring washers and studding.

Zinc-plated screw hooks and eyes in blister and bulk packs.

Zinc-plated screws, bolts, nuts and washers in trade assortments.

Stainless and steel hinges for doors, gates and cabinetry.

Tee hinges, hasp and staple sets and gate latches for outdoor use.

Powder-coated steel brackets for shelving and structural support.

Flat, tee and corner plates for timber joint reinforcement.

Brass, laminated and combination padlocks for site and storage.

Euro cylinders, rim locks and mortice sets with matched keys.

Swivel, fixed and braked castors with rubber or PU tyres.

Insulated copper-clad cables with heavy duty crocodile clamps.

Insulated crocodile clips for testing, charging and workshop use.

Welded steel hydraulic jack with safety overload valve.

Four-way and telescopic wrenches for wheel nut removal.

Air chuck inflator with analogue gauge and flexible hose.

Fast-heating glue gun with drip-resistant nozzle and stand.

Skeleton and sausage guns with smooth-rod thrust ratios.

Lever riveter with four interchangeable nosepieces and rivets.

Double and triple pad lifters for glass, tile and panel handling.

UV-stable nylon 66 ties in black, white and colour options.

Reusable ties, screw-mount heads and self-adhesive bases.

Braided PP, nylon and cotton cords supplied on reels or hanks.

Elastic bungee cords and ratchet straps for load securing.

Damage-free adhesive, suction and screw hooks for home use.

Towel bars, robe hooks, toilet seat fixings and shower fittings.

Extendable rods, brackets, rings and blind fittings.

Sharp bypass blade geometry for clean cuts and low hand fatigue.

Long-reach shears for consistent hedge shaping on large sites.

Heat-treated blade and reinforced socket for heavy digging.

Reinforced hose with quick-connect fittings and spray control.

Coated palm gloves with grip and abrasion resistance for site use.

Impact-resistant lenses with anti-scratch and anti-fog treatment.

Head and hearing protection for high-noise construction environments.

High-visibility jackets and vests with logo printing options.